Fashion Mini Notebook Pocket Digital Jewelry Electronic Scales

• Customization: Available
• Accuracy: 0.01g
• Weighing: <3kg
• Model NO.: SN-JY17
• Display Type: LCD
• Location: Desktop Scale
• Material: ABS
• Measure Method: Automatic
• Application: Commercial Scale, Special Scales
• Function: Weighing Scale
• Structure: Electronic Scale
• Shape: Square
• Transport Package: 50PCS/CTN

Product Description

Product Description

 

 

Feature:         
LCD display with blue backlight,which is best care for you eyes.
Support forg oz gn ct pcs meet your various need.
You can shutdown it by pressing the power switch,or it would power off in 1min without operation.
Have a large weighing range, the min capacity is 0.5g and the max capacity is 3000g.
Have automatic calibration function,you can calibrate the scale just with a weight.
  

1. Unit: g oz gn ct pcs   

2. Max.Range: 500g/0.01;1000-2000g/0.1g

3. LCD Display Light: Blue

4. Automatic Turn Off: 60 seconds

5. Overload protection function: Yes

6. Equipped with peeling function and calibration function

7. Battery: 2*AAA

8. Product Size: 167×120×23mm

9. N.W: 251g 

10. Color: Black

Detailed Photos

All products have been calibrated before delivery, if this scale can not weigh normally, please calibrate again.
Weights used for calibration:3000g , 2000g , 1000g , 500g , 300g , 200g , 100g . 
1.Long press[Model] key when it is on until the "CAL" shown on display, and then the nominal weighing data of this machine will be shown on display.
2.Put the weights with same weight of calibration on scale, then press [ON/OFF], [PASS] will be shown on display, complete calibration. This machine is in normal weighing state.
If "out2" shown on display when start up, please calibrate the scale again as follows:
1.Turn off the scale.
2.Press[ON/OFF] key and [MODE] key at the same time until a set of numbers shown on display, then press[ON/OFF] key, there will be "CAL" shown on display, after that a calibration weight will be shown on display.
3.Put the weights with same weight of calibration on center of platform, then press[ON/OFF] key.
4.When "PASS" shown on display, this machine is in normal weighing state. Calibration completed.
5.Solution to malfunction.
There are some reasons cause inaccurate weighing: low battery indication, incorrect calibration, the weight of goods exceeds the maxium range of scale and not weighing on the flat ground, ect.

IV.Calibration:

Packaging & Shipping

1pc/gift box, 50pcs/ctn
Ctn size: 60* 27.5* 21cm
G.W.:14.6kgs

Certifications

Company Profile